Compare Models: 2023 Exmark Radius X-Series 60 in. Kawasaki FX921V 31 hp vs 2023 Exmark Radius X-Series 60 in. Kawasaki FX921V 31 hp at Riverside Outdoor Power

2023 Exmark Radius X-Series 60 in. Kawasaki FX921V 31 hp in Lowell, Michigan — 2023 Exmark Radius X-Series 60 in. Kawasaki FX921V 31 hp

View Details

Specs
Features

General Information

Manufacturer

Exmark

Model Year

2023

Model

Radius X-Series 60 in. Kawasaki FX921V 31 hp

Model Code

RAX921GKA604A3

Color

Red

Body

Frame

Tractor - Unibody, welded, heavy-duty 2 x 3 in. rectangular tubular steel

Caster forks - 0.375 in. thick caster yoke arms

Tractor - Unibody, welded, heavy-duty 2 x 3 in. rectangular tubular steel

Caster forks - 0.375 in. thick caster yoke arms

Seat

Deluxe suspension (adjustable spring suspension) seat with high back, molded foam flip-up armrests, and integral safety switch

Rollover Protection (ROPS)

2-post foldable ROPS standard with seat belt and latch

Safety Features

Safety package - Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators

Drivetrain

Drive System

Hydro

Drive Type

Drive description - Dual Hydro Gear ZT3400, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters

Number of Speeds

Infinitely variable speed selection

Travel Speed Forward

0 - 10.0 mph (16.1 kmph)

Travel Speed Reverse

0 - 6.0 mph (9.7 kmph)

Drive Tires

24 x 12-12 K3012

Drive wheel release - Allows unit movement without engine running

24 x 12-12 K3012

Drive wheel release - Allows unit movement without engine running

Steering Tires

Front caster tires - 13 x 6.5-6, smooth tread, pneumatic. Sealed taper roller bearings

Parking Brake

Lever-actuated pawl brake

Electrical

Battery

12 V with 15 A alternator

Instrumentation

Fuel indicator - Translucent visual

Hour Meter

Engine

Engine Make

Kawasaki

Engine Model

FX921V, V-Twin Series

Gross Horsepower

31 hp @ 3,750 rpm engine speed

Displacement

999 cc

Fuel System

Carbureted

Air Cleaner

Air filter - Heavy-duty canister air filtration system

Fuel Capacity

7 gal. (26.5 l) single fuel tank with single fill location

Measurements

Length

82 in. (208 cm)

Width

73 in. (185 cm)

Height

70 in. (178 cm)

Weight

Curb - 1,232 lb.

Mowing Width

60 in.

Mowing Height Range

1.5 - 5.0 in. (3.8 - 12.7 cm) in 0.25 in. (0.6 cm) increments

Mowing Height Adjustments

Adjustable from operator's seat

Operational

Steering

Control - Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment

Deck Construction

10 ga. high strength alloy top that is formed and continuously seam welded, with 7 ga. side skirt

Deck style - Floating deck

Deck style description - Full-floating UltraCut Series 4

10 ga. high strength alloy top that is formed and continuously seam welded, with 7 ga. side skirt

Deck style - Floating deck

Deck style description - Full-floating UltraCut Series 4

Deck Lift

Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position

Discharge

Side discharge standard, with molded discharge chute and option to bag or mulch

Spindles

Blade - No maintenance, sealed and non-greasable spindles; 7.75 in. diameter cutter housing with 25 mm (0.98 in.) diameter spindle shaft and splined blade driver

Blades

3 at 20.50 in. length

Blade Tip Speed

Approximately 18,500 fpm

Power Take-Off (PTO)

Engagement - MagStop electromagnetic 225 ft. lb. clutch

Tractor Hitch

Tow hitch and jack receiver

Other

Includes

Cup holder

Warranty

Commercial / Consumer - 4 year limited or 1,000-hour limited

Features

FULL-SUSPENSION OPERATOR SEAT: Radius S- and X-Series models feature an adjustable full-suspension operator seat, with three inches of suspension and an EVC stretch foam base for superior all day mowing comfort.
SERVICE MADE EASY: The floor pan and belt shields remove easily without tools, making it easier to access the belts and top of the cutting deck for maintenance. Plus, a standard welded jack receiver on the Radius frame enables easier service of the underside of the deck when combined with the optional jack.
ULTRACUT DECK TECHNOLOGY: Exmark’s exclusive UltraCut decks are featured on Radius models. Every UltraCut cutting deck features Exmark’s exclusive maintenance-free, sealed-bearing spindle assemblies for increased durability and reduced downtime, combined with zero maintenance.
HEAVY DUTY FABRICATED FRAME: With a fully welded frame built from 2x3-inch frame tubes, the Radius design places major components including the engine, hydro drive system and fuel tank lower in the frame. The lower center of gravity and better mass centralization results in increased traction and stability, with improved handling.
NEW SIDE PODS: The new side pod design places the most important controls right at the operator’s fingertips, for easy operation with a minimum of necessary movement.
UPGRADED CASTERS: Radius X-Series models feature upgraded caster assemblies featuring maintenance-free tapered caster pivot bearings, with cast steel caster forks and large, semi-pneumatic caster tires.

Features

FULL-SUSPENSION OPERATOR SEAT: Radius S- and X-Series models feature an adjustable full-suspension operator seat, with three inches of suspension and an EVC stretch foam base for superior all day mowing comfort.
SERVICE MADE EASY: The floor pan and belt shields remove easily without tools, making it easier to access the belts and top of the cutting deck for maintenance. Plus, a standard welded jack receiver on the Radius frame enables easier service of the underside of the deck when combined with the optional jack.
ULTRACUT DECK TECHNOLOGY: Exmark’s exclusive UltraCut decks are featured on Radius models. Every UltraCut cutting deck features Exmark’s exclusive maintenance-free, sealed-bearing spindle assemblies for increased durability and reduced downtime, combined with zero maintenance.
HEAVY DUTY FABRICATED FRAME: With a fully welded frame built from 2x3-inch frame tubes, the Radius design places major components including the engine, hydro drive system and fuel tank lower in the frame. The lower center of gravity and better mass centralization results in increased traction and stability, with improved handling.
NEW SIDE PODS: The new side pod design places the most important controls right at the operator’s fingertips, for easy operation with a minimum of necessary movement.
UPGRADED CASTERS: Radius X-Series models feature upgraded caster assemblies featuring maintenance-free tapered caster pivot bearings, with cast steel caster forks and large, semi-pneumatic caster tires.