Compare Models: Generac Protector 130kW vs Generac Protector 130kW at Riverside Outdoor Power

Generac Protector 130kW in Lowell, Michigan — Generac Protector 130kW

View Details

Specs
Features

General Information

Manufacturer

Generac

Model

Protector 130kW

Model Code

RG13090

Color

Bisque

Engine

Engine Make

Generac

Fuel Type

Natural gas, Propane vapor

Oil Capacity

Crankcase - 10.5 qt. (9.9 l)

Oil pump type - Gear

Oil filter type - Full Flow Spin-On Cartridge

Crankcase - 10.5 qt. (9.9 l)

Oil pump type - Gear

Oil filter type - Full Flow Spin-On Cartridge

Bore x Stroke

4.5 x 4.3 in. (114 x 108 mm)

Compression Ratio

9.1:1

Alternator

Type - Synchronous

Rotor insulation class - H

Stator insulation class - H

Telephone Interference Factor (TIF) - < 50

Output leads 1-phase - 4 wire

Output leads 3-phase - 12 wire

Bearings - Sealed ball

Coupling - Flexible disc

Excitation system - Synchronous Brushless

Total Harmonic Distortion - < 5%

Type - Synchronous

Rotor insulation class - H

Stator insulation class - H

Telephone Interference Factor (TIF) - < 50

Output leads 1-phase - 4 wire

Output leads 3-phase - 12 wire

Bearings - Sealed ball

Coupling - Flexible disc

Excitation system - Synchronous Brushless

Total Harmonic Distortion - < 5%

Displacement

540 ci (8.9 l)

Fuel Consumption

25% of rated load (Natural Gas) - 509 cu. ft. / hr (14.4 m³ / hr)

25% of rated load (Propane) - 172 cu. ft. / hr (4.9 m³ / hr)

50% of rated load (Natural Gas) - 858 cu. ft. / hr (24.3m³ / hr)

50% of rated load (Propane) - 278 cu. ft. / hr 7.9 m³ / hr)

75% of rated load (Natural Gas) - 1,206 cu. ft. / hr (34.1 m³ / hr)

75% of rated load (Propane) - 385 cu. ft. / hr (10.9 m³ / hr)

100% of rated load (Natural Gas) - 1,555 cu. ft. / hr (44.0 m³ / hr)

100% of rated load (Propane) - 491 cu. ft. / hr (13.9 m³ / hr)

25% of rated load (Natural Gas) - 509 cu. ft. / hr (14.4 m³ / hr)

25% of rated load (Propane) - 172 cu. ft. / hr (4.9 m³ / hr)

50% of rated load (Natural Gas) - 858 cu. ft. / hr (24.3m³ / hr)

50% of rated load (Propane) - 278 cu. ft. / hr 7.9 m³ / hr)

75% of rated load (Natural Gas) - 1,206 cu. ft. / hr (34.1 m³ / hr)

75% of rated load (Propane) - 385 cu. ft. / hr (10.9 m³ / hr)

100% of rated load (Natural Gas) - 1,555 cu. ft. / hr (44.0 m³ / hr)

100% of rated load (Propane) - 491 cu. ft. / hr (13.9 m³ / hr)

Battery

Charger Alternator - 40 A

Static charger - 5 A

Recommended - Group 31, 925 CCA

System voltage - 12 V

Charger Alternator - 40 A

Static charger - 5 A

Recommended - Group 31, 925 CCA

System voltage - 12 V

Cooling

Pressurized Closed

System coolant capacity - 6.3 gal. (24 l)

Water pump - Belt driven

Fan speed - 2,330 rpm

Fan diameter - 22 in. (55.9 cm)

Fan mode - Pusher

Pressurized Closed

System coolant capacity - 6.3 gal. (24 l)

Water pump - Belt driven

Fan speed - 2,330 rpm

Fan diameter - 22 in. (55.9 cm)

Fan mode - Pusher

Engine Model

8 cylinder

Engine Type

Measurements

Weight

Shipping - 3,185 lb. (1,445 kg)

Height

Overall - 64.1 in. (1,627 mm)

Width

Overall - 40.7 in. (1,035 mm)

Length

Overall - 132.7 in. (3,369 mm)

Operational

AC Frequency

60 Hz

Noise Level

Sound output in 75 dB(A) @ 23 ft. (7 m) with generator in normal operation

Maximum Temperature

Ambient - 122 °F (50 °C)

DC Output

120 / 240 V, 1Ø, 1.0 pf (LPG / NG) - 130 kW, 542 A, 600 CB

120 / 208 V, 3Ø, 0.8 pf (LPG / NG) - 130 kW, 451 A, 500 CB

120 / 240 V, 3Ø, 0.8 pf (LPG / NG) - 130 kW, 391 A, 400 CB

277 / 480 V, 3Ø, 0.8 pf (LPG / NG) - 130 kW, 195 A, 225 CB

120 / 240 V, 1Ø, 1.0 pf (LPG / NG) - 130 kW, 542 A, 600 CB

120 / 208 V, 3Ø, 0.8 pf (LPG / NG) - 130 kW, 451 A, 500 CB

120 / 240 V, 3Ø, 0.8 pf (LPG / NG) - 130 kW, 391 A, 400 CB

277 / 480 V, 3Ø, 0.8 pf (LPG / NG) - 130 kW, 195 A, 225 CB

DC Voltage

Regulation type - Full Digital

Regulation sensing - All

Regulation - Designed for Sensitive Electronics

Regulation type - Full Digital

Regulation sensing - All

Regulation - Designed for Sensitive Electronics

Other

Warranty

5 year limited

Enclosure

ALUMINUM WEATHER PROTECTIVE ENCLOSURE: Ensures protection against mother nature. Electrostatically applied textured epoxy paint for added durability.
ENCLOSED CRITICAL GRADE MUFFLER: Quiet, critical grade muffler is mounted inside the unit to prevent injuries.
SMALL, COMPACT, ATTRACTIVE: Makes for an easy, eye appealing installation.
SAE WEATHER PROTECTIVE ENCLOSURE: Sound attenuated enclosure ensures quiet operation.

Features

5-Year Limited Warranty - Consistent with the Protector Series lineup, 5-year limited warranty is standard
True Power™ Technology delivers best-in-class power quality with less than 5 percent total harmonic distortion for clean, smooth operation of sensitive electronics and appliances
Tough, Durable All-Aluminum Enclosures: Our RhinoCoat™ powder-coated finish helps make corrosion-resistant aluminum perfect for all weather conditions.
24/7/365 Customer Support Team standing by all day, every day from our headquarters in Wisconsin to answer any questions you might have.
NFPA 110 Compliant Protector product's first true commercial application generator. With proper installation, maintenance, and accessory kits the Power Zone 410 controlled generator meets NFPA 110 compliance.
Quiet-Test™ Self-Test Mode runs at a lower RPM for a five- or twelve-minute test, making generators significantly quieter than other brands while consuming less fuel.
Smart, User-Friendly Controls Generac's Power Zone 410 controller is easily accessible, multi-lingual, and offers a full system status and protection. The modern graphical display comes standard with a heater to keep moisture away from the electronics, an onboard 5A battery charger, and maintains strict power regulation to protect your sensitive electronics.
Generac generators and engines are engineered and built in the USA*. *Assembled in the USA using domestic and foreign parts
Generac Designed & Built Engine - Purpose-built exclusively for generator use. Engine originally designed and built for Generac Industrial applications.
INNOVATIVE DESIGN & PROTOTYPE TESTING: are key components of GENERAC’S success in “IMPROVING POWER BY DESIGN.” But it doesn’t stop there. Total commitment to component testing, reliability testing, environmental testing, destruction and life testing, plus testing to applicable CSA, NEMA, EGSA, and other standards, allows you to choose GENERAC POWER SYSTEMS with the confidence that these systems will provide superior performance.
TEST CRITERIA: Prototype tested. Nema mg1-22 evaluation. System torsional tested. Motor starting ability.
SOLID-STATE, FREQUENCY COMPENSATED VOLTAGE REGULATION: This state-of-the-art power maximizing regulation system is standard on all Generac models. It provides optimized FAST RESPONSE to changing load conditions and MAXIMUM MOTOR STARTING CAPABILITY by electronically torque-matching the surge loads to the engine.
SINGLE SOURCE SERVICE RESPONSE: from Generac’s extensive dealer network provides parts and service know-how for the entire unit, from the engine to the smallest electronic component.
GENERAC TRANSFER SWITCHES: Long life and reliability are synonymous with GENERAC POWER SYSTEMS. One reason for this confidence is the GENERAC product line is offered with its own transfer systems and controls for total system compatibility.
Intake Air System - Turbocharged and Aftercooled
Lifter Type - Hydraulic Roller
Governor Type - Electronic
Governor Frequency Regulation - Isochronous
Governor Steady State Regulation - Designed for Sensitive Electronics
Carburetor - Down Draft
Secondary Fuel Regulator
Fuel Shut Off Solenoid
LP / NG Fuel Pressure - 7 - 11 in Water Column
Air Flow (Fan Air Flow Across Radiator) - Open Set - 5,415 scfm (153.3 m³ / min)
Flow at Rated Power - 371 scfm (10.5 m³ / min)
Exhaust Flow at Rated Output - 1,198 scfm (34 m³ /min)
Exhaust Temperature (Rated Output) - 1,285 °F (696 °C)
Rated Engine Speed - 1,800 rpm
Temperature deration on NG / LP - 77°F before derate.
Altitude deration - 3% for every 1,000 ft. above 600 ft.
Closed coolant recovery system.
UV / Ozone resistant hoses.
UL 2200 Listed.

Generator

Revolving field heavy duty generator
Directly connected to the engine
Operating temperature rise 135° C above 25° C ambient
Class H insulation is NEMA rated
All models fully prototyped tested

Enclosure

ALUMINUM WEATHER PROTECTIVE ENCLOSURE: Ensures protection against mother nature. Electrostatically applied textured epoxy paint for added durability.
ENCLOSED CRITICAL GRADE MUFFLER: Quiet, critical grade muffler is mounted inside the unit to prevent injuries.
SMALL, COMPACT, ATTRACTIVE: Makes for an easy, eye appealing installation.
SAE WEATHER PROTECTIVE ENCLOSURE: Sound attenuated enclosure ensures quiet operation.

Features

5-Year Limited Warranty - Consistent with the Protector Series lineup, 5-year limited warranty is standard
True Power™ Technology delivers best-in-class power quality with less than 5 percent total harmonic distortion for clean, smooth operation of sensitive electronics and appliances
Tough, Durable All-Aluminum Enclosures: Our RhinoCoat™ powder-coated finish helps make corrosion-resistant aluminum perfect for all weather conditions.
24/7/365 Customer Support Team standing by all day, every day from our headquarters in Wisconsin to answer any questions you might have.
NFPA 110 Compliant Protector product's first true commercial application generator. With proper installation, maintenance, and accessory kits the Power Zone 410 controlled generator meets NFPA 110 compliance.
Quiet-Test™ Self-Test Mode runs at a lower RPM for a five- or twelve-minute test, making generators significantly quieter than other brands while consuming less fuel.
Smart, User-Friendly Controls Generac's Power Zone 410 controller is easily accessible, multi-lingual, and offers a full system status and protection. The modern graphical display comes standard with a heater to keep moisture away from the electronics, an onboard 5A battery charger, and maintains strict power regulation to protect your sensitive electronics.
Generac generators and engines are engineered and built in the USA*. *Assembled in the USA using domestic and foreign parts
Generac Designed & Built Engine - Purpose-built exclusively for generator use. Engine originally designed and built for Generac Industrial applications.
INNOVATIVE DESIGN & PROTOTYPE TESTING: are key components of GENERAC’S success in “IMPROVING POWER BY DESIGN.” But it doesn’t stop there. Total commitment to component testing, reliability testing, environmental testing, destruction and life testing, plus testing to applicable CSA, NEMA, EGSA, and other standards, allows you to choose GENERAC POWER SYSTEMS with the confidence that these systems will provide superior performance.
TEST CRITERIA: Prototype tested. Nema mg1-22 evaluation. System torsional tested. Motor starting ability.
SOLID-STATE, FREQUENCY COMPENSATED VOLTAGE REGULATION: This state-of-the-art power maximizing regulation system is standard on all Generac models. It provides optimized FAST RESPONSE to changing load conditions and MAXIMUM MOTOR STARTING CAPABILITY by electronically torque-matching the surge loads to the engine.
SINGLE SOURCE SERVICE RESPONSE: from Generac’s extensive dealer network provides parts and service know-how for the entire unit, from the engine to the smallest electronic component.
GENERAC TRANSFER SWITCHES: Long life and reliability are synonymous with GENERAC POWER SYSTEMS. One reason for this confidence is the GENERAC product line is offered with its own transfer systems and controls for total system compatibility.
Intake Air System - Turbocharged and Aftercooled
Lifter Type - Hydraulic Roller
Governor Type - Electronic
Governor Frequency Regulation - Isochronous
Governor Steady State Regulation - Designed for Sensitive Electronics
Carburetor - Down Draft
Secondary Fuel Regulator
Fuel Shut Off Solenoid
LP / NG Fuel Pressure - 7 - 11 in Water Column
Air Flow (Fan Air Flow Across Radiator) - Open Set - 5,415 scfm (153.3 m³ / min)
Flow at Rated Power - 371 scfm (10.5 m³ / min)
Exhaust Flow at Rated Output - 1,198 scfm (34 m³ /min)
Exhaust Temperature (Rated Output) - 1,285 °F (696 °C)
Rated Engine Speed - 1,800 rpm
Temperature deration on NG / LP - 77°F before derate.
Altitude deration - 3% for every 1,000 ft. above 600 ft.
Closed coolant recovery system.
UV / Ozone resistant hoses.
UL 2200 Listed.

Generator

Revolving field heavy duty generator
Directly connected to the engine
Operating temperature rise 135° C above 25° C ambient
Class H insulation is NEMA rated
All models fully prototyped tested